oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl70.0m-10 70.0 mhz if saw filter 9.8 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl70.0m-10 january 2011 rev a 70.0 mhz if saw filter 9.8 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=220nh q > 40, c1=20pf output l2=180nh q > 40 source/load impedance 50 ?
oscilent part number 813-sl70.0m-10 january 2011 rev a 70.0 mhz if saw filter 9.8 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -40 - 85 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 70.0 insertion loss at fo db - 10.4 12.0 amplitude ripple variation db p-p - 0.55 1.0 group delay variation nsec - 55 150 absolute delay at fo sec - 1.2 - temperature coefficient ppm/c - -84 - bandwidth at ?1.0 db mhz 9.5 9.8 - bandwidth at ?3.0 db mhz 10.2 10.4 - bandwidth at ?40.0 db mhz - 13.1 14.0 relative attenuation: lower sidelobe db 40 48 - upper sidelobe db 40 45 - in/out return loss at fo db - - -
oscilent part number 813-sl70.0m-10 january 2011 rev a 70.0 mhz if saw filter 9.8 mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|